塑膠原料特性
最新消息 / HC News
2022-09-13
Raw Material |
Process Temp.℃ | Mold Temp. ℃ | Heat Distortion Temp.℃ | Shrinked Rate % | |
| PP POLYPROPYLENE | 205 - 288 | 40 - 60 | 52 - 60 | 1.0-2.5 | |
| LDPE LOW DENSITY POLYETHYLENE |
149 - 371 | 20 - 60 | 32 - 41 | 1.5 - 5.0 | |
| HDPE HIGH DENSITY POLYETHYLENE |
149 - 316 | 10 - 60 | 43 - 54 | 2.0 - 5.0 | |
| GPPS GENERAL PURPOSE POLYSTYRENE |
163 - 316 | 20 - 60 | 95 | 0.2 - 0.6 | |
| HIPS POLYSTYRENE (Impact resistance) |
163 - 316 | 20 - 60 | 75 - 80 | 0.2 - 0.6 | |
| ABS |
Heat resistance | 260 - 288 | 50 - 60 | 95 - 98 | 0.3 - 0.8 |
| Impact resistance | 193 - 274 | 60 - 80 | 0.3 - 0.8 | ||
| AS ACRYLONITRILE STYRENE |
191 - 316 | 50 - 70 | 88 - 104 | 0.2 - 0.7 | |
| PMMA POLY METHYL METHACRYLATE |
204 - 254 | 40 - 70 | 93 - 102 | 0.4 - 0.8 | |
| PVC POLYVINYL CHLORIDE |
170 - 210 | 10 - 60 | 54 - 79 | 0.1 - 0.5 | |
| PA 6 POLYAMIDE 6 |
227 - 316 | 60 - 80 | 66 - 79 | 0.6 - 1.4 | |
| PA 66 POLYAMIDE 66 |
271 - 382 | 60 - 80 | 66 - 104 | 1.5 | |
| POM POLYPHENYLENE SULFIDE |
193 - 243 | 95 | 136 | 2.0 - 2.5 | |
| PBT POLYBUTYLENE TEREPH THALATE |
210 - 250 | 80 | 58 | 2.0 | |
| PET POLYETHYLENE TEREPH THALATE |
293 - 310 | 95 | 80 - 92 | 0.2 - 0.8 | |
| PPS POLYETHYLENE SULFIDE |
290 - 310 | 120 - 130 | 115 - 120 | 0.2 | |
| PC POLYCARBONATE |
274 - 331 | 90 - 110 | 129 - 141 | 0.5 - 0.7 | |
Raw Material |
Process Temp.℃ | Mold Temp. ℃ | Heat Distortion Temp.℃ | Shrinked Rate % | |
| EP ETHYLENE PROPYLENE |
60 - 90 | 139 - 167 | 0.6 - 1.0 | ||
| PF PHENOLIC RESN |
70 - 90 | 183 - 222 | 0.4 - 0.9 | ||
| MF MELAMINE RESIN |
70 - 100 | 161 - 189 | 0.5 - 1.5 | ||
| UF | 50 - 140 | 161 - 178 | 0.6 - 1.4 | ||
| UP | 25 - 50 | 150 - 183 | 0.01 | ||
關鍵字：ABS塑膠射出機,PMMA塑膠射出機,PC塑膠射出機